- Front Mount Intercooler
- Brand
- Airtec (129)
- Ajp Distributors (79)
- Alloyworks (67)
- Asi Performance (60)
- Buyaparts (35)
- Csks (39)
- Cxracing (136)
- Emusa (107)
- Epartsgogo (59)
- Gpi Racing (49)
- Gravity (34)
- Grimmspeed (38)
- Hpd (36)
- Kac (30)
- Maxpeedingrods (33)
- Mishimoto (27)
- Mtc (42)
- Perrin Performance (32)
- Rev9 (131)
- Rev9 Power (64)
- ... (2566)
- Core Size
- 10.87\ (2)
- 17.5\ (2)
- 18\ (36)
- 19.50\ (3)
- 19.50x6.00x2.50 (2)
- 194w * 530h * 75t Mm (20)
- 19\ (38)
- 20x8x5\ (5)
- 21\ (2)
- 21x7x2.5 (2)
- 24 X 12 X 3 (2)
- 24\ (139)
- 25\ (2)
- 28\ (4)
- 460 X 160 X 90 Mm (4)
- 600 X 300 X 76 Mm (3)
- 600 X280 X 70mm (3)
- 600mm X 300mm X 76mm (3)
- 600x300x76mm (2)
- 700x300x100mm (9)
- ... (3510)
- Features
- Fitment Type
- Overall Size
- Type
- Air / Fuel Line (3)
- Diesel (4)
- Fmic Kit (6)
- Front Mount (6)
- Gpi (2)
- Intercooler (457)
- Intercooler Core (28)
- Intercooler Kit (153)
- Intercoolers (5)
- Mount Intercooler (14)
- Piping (8)
- Radiator (7)
- Tube & Fin (4)
- Turbo Charger (23)
- Turbo Intercooler (981)
- Turbo Kit (3)
- Turbocharger (4)
- Turbocharger Up Pipe (19)
- Upgrade Kit (44)
- Upgraded Intercooler (3)
- ... (2019)
AIRTEC Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler upgrade
AIRTEC Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler upgrade. AIRTEC Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler upgrade Airtec Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler (comes with full brackets and fittings included). Airtec's latest creation is this intercooler for the Mondeo 2.0 & 2.2 Turbo diesels, they have now changed the total design with new high flow 60mm core and Angled flow end tanks, which in turn has increased power, torque & also lowered ATC Temps, Yes its really that good. 5.2 bhp increase & we saw the torque rise by a massive 31.5 lb/ft , this figure will be easily doubled when fitted to a remapped Mondeo. Test results from Street Performance's Modified Mondeo Diesel. Mods on car are : -Free Flow exhaust & decat -Pipercross panelfilter -Massive Airtec Intercooler upgrade -Custom map up to 3.3k rpm. Street Performance's Modified Mondeo made 208bhp & 441 lbft of torque! With mapping we saw the power rise up to 208hp. We did limit the car's torque for more pull tru revs & as smooth power curve as possible but will be raised 10-20Nm after some more fiddling with the map! Along with 220+hp to make ST220/ ST225 owners jealous, with same or better performance with 40-50MPG. They also tested 2 cars to see what the Intake Air charge tempertures were under load, a Complete standard car and street performance's modified Mondeo, Both cars tested with 8 degrees Ambient Air temps, Results - Completely Standard car under load, the Intake tempertures kept rising up to 55-60° and above! Fully tuned car with the Airtec Intercooler fitted and the Intake temps never went higher then 15°, so IC works very well and gives much less stress on engine. The item "AIRTEC Mondeo Mk3 2.0/2.2 Turbo Diesel front mount Intercooler upgrade" is in sale since Thursday, December 10, 2015. This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Intercoolers & Parts". The seller is "roosemotorsport" and is located in Lincoln. This item can be shipped worldwide.
- Brand: Airtec
- Manufacturer Part Number: ATIN20