- Front Mount Intercooler
- Brand
- Airtec (129)
- Ajp Distributors (79)
- Alloyworks (65)
- Asi Performance (60)
- Buyaparts (35)
- Csks (39)
- Cxracing (136)
- Emusa (107)
- Epartsgogo (59)
- Gpi Racing (49)
- Gravity (34)
- Grimmspeed (38)
- Hpd (36)
- Kac (30)
- Maxpeedingrods (33)
- Mishimoto (27)
- Mtc (42)
- Perrin Performance (32)
- Rev9 (131)
- Rev9 Power (64)
- ... (2562)
- Features
- Finish
- Aluminum (20)
- Black (8)
- Black / Red (2)
- Brand New (27)
- Brushed Aluminum (21)
- Chrome (3)
- Chrome Plated (2)
- Coated (2)
- Full Aluminum (26)
- Machined Sliver (2)
- Matte (3)
- Matte Textured Paint (4)
- Natural (8)
- Natural Finish (3)
- New (2)
- Polished (191)
- Polished / Red (2)
- Polished Aluminum (7)
- Smooth (9)
- Unpainted (2)
- ... (3443)
- Fitment Type
- Material
- Type
- Air / Fuel Line (3)
- Diesel (4)
- Fmic Kit (6)
- Front Mount (6)
- Gpi (2)
- Intercooler (454)
- Intercooler Core (28)
- Intercooler Kit (153)
- Intercoolers (5)
- Mount Intercooler (14)
- Piping (8)
- Radiator (7)
- Tube & Fin (4)
- Turbo Charger (23)
- Turbo Intercooler (978)
- Turbo Kit (3)
- Turbocharger (4)
- Turbocharger Up Pipe (19)
- Upgrade Kit (44)
- Upgraded Intercooler (3)
- ... (2019)
FMINT208GTI Forge Motorsport Front Mounting Intercooler fits Peugeot 208 GTi
Amber Performance are an Approved Forge Motorsport Reseller & Only sell 100% Genuine Forge Motorsport products. Front Mounting Intercooler for the Peugeot 208 GTi.
The stock intercooler on the 208 GTi is the same compromised side mount intercooler used on the 207 GTi so we know its not up to the job even on a stock car. On a remapped engine with the stock intercooler we were seeing inlet temperatures of 105 deg C (215 deg F) the highest we have recorded on any car ever! This has a huge detrimental effect on power and torque.
Our intercooler is a full replacement single pass (left to right) core which mounts to the stock crash bar in the car. The pipework supplied with our intercooler joins to the pipes that connected to the stock intercooler so installation is easy. The only cutting needed is to the ducting on the radiator to allow the pipework to pass through. All the silicon hoses, hard pipes, clips, bolts, nuts and jubilee clips needed to install the intercooler are included, along with full colour installation instructions. Performance wise the car we used had a Superchips remap. We tested the stock intercooler and our intercooler back to back on the same day and the increases were dramatic. Intake temperature dropped form 105 deg C to 45 deg C - a drop of 60 deg Power went from 190bhp to 224 bhp an increase of 34bhp Torque went from 222 lbft to 244 lbft an increase of 22 lbft. You can look at the dyno graph comparison of the intercooler showing the increase in performance, but PLEASE REMEMBER this was specific to the car we had in for testing, and you may not get the same results from a stock or mildly tuned car. All parts necessary for installation are included, together will full instructions. Please specify at point of order what colour silicone hoses you require either Red, Black or Blue. Please be aware this item is made to order - for more info please message us.If you require your parts quickly then please check stock before ordering to avoid any unexpected lead time. The item "FMINT208GTI Forge Motorsport Front Mounting Intercooler fits Peugeot 208 GTi" is in sale since Friday, May 1, 2015. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Other Car Tuning & Styling". The seller is "amber-performance" and is located in Luton, Bedfordshire. This item can be shipped worldwide.
- Manufacturer Part Number: FMINT208GTI
- Brand: Forge Motorsport
- Part Manufacturer: Forge Motorsport
- Manufacturer: Peugeot
- Model: 208 GTi