The most important part of any intercooler system is the core. The core cools the charged air on the way to the engine. The factory Subaru tube and fin intercooler was designed to be easy to manufacture, but is not good for performance. Our testing has shown the optimum core design is the 3/8 bar and plate style that has a 3/8 charge air and ambient air path, instead of the common 1/4 size. The PERRIN bar and plate core design is much more durable than tube and fin with the ability to withstand rocks and other debris, which may enter the scoop.The PERRIN intercooler core is 28 long x 9.25 tall x 3.5 deep with a volume of 906.5 cu-in. Giving the PERRIN Intercooler the best overall design for cooling and pressure drop! Our intercooler support beam is constructed from boxed steel and powder coated black.
Competitors use inexpensive aluminum bumper beams which save a little weight but are easily destroyed in a collision. Every PERRIN intercooler is powder coated to further protect your intercooler from the elements making it look awesome for years to come. The PERRIN designed end tanks control for near perfect dispersal of hot air across the intercooler core. By eliminating any 90º corners adding a smooth, and gradual taper from top to bottom turbulence is eliminated.Each end tank incorporates an innovative mounting tab to secure the core to the mounting beam. PERRIN boost tubes are CNC mandrel bent from aluminum tubing for better weight reduction. Every boost tube has an over sized beaded end to ensure the hose clamps and couplers stay connected and sealed!
We choose to take the smoothest shortest path to get air to and from the intercooler. Right off the turbo a smooth offset coupler carries the hot side air charge to a perfectly matched 2.25 boost tube.We chose 2.25 tubing for a smoother, cleaner, obstruction free routing while still being large enough to flow more WHP than most turbos can put out. The air charge then is routed through the engine bay next to the battery, and down behind the radiator to the intercooler. The cold side boost tubes are mounted as high as possible in the engine compartment to clear all turbo and intake combinations as it travels to the throttle body through the engine bay. The PERRIN Front Mount Intercooler kit includes a PERRIN Coolant Overflow Tank. It adds clearance for better boost tube routing, holds more coolant than previous designs and uses the OEM tank cap for a great seal! The PERRIN Coolant Overflow Tank is protected from the elements by a black texture powder coating. PERRIN is one of the only intercooler manufactures who pressure tests every intercooler.
We pressurize every intercooler to 50 psi. This ensures you never get a core with a leak!
Even the slightest leak can cause your vehicle to lose power, literally bleeding turbo boost pressure out the intercooler. The PERRIN Front Mount Intercooler kit only adds 9lbs of weight! If you take all the factory pieces you remove and compare them to the PERRIN parts you are installing, you will find you only added 9lbs!
Included with our front mount intercooler is a free PERRIN logged intercooler stencil. Use the stencil to easily paint the PERRIN logo across the front of your intercooler. Simply peel, stick, paint, and remove.This above dyno graph was pulled from the testing we did comparing the OEM Top Mounted Intercooler, PERRIN Top Mounted Intercooler and the PERRIN Front Mount Intercooler. We had the car all set so we could do these tests back to back with only a couple minutes between runs.
The above test compares the small stock FMIC to the huge PERRIN FMIC, an you can see there is 10-18WHP and 10-15ft-lbs of torque gain while doing this. Part of the reason for the gain is the intercooler is less restrictive and also cools the charge air better. In this case, the PERRIN FMIC knocked off about 40F from the intake charge temps!
The car we used was a Stage 2 08 STI, which had our PERRIN Turbo Back Exhaust and PERRIN AccessPORT mapping running about 20psi peak boost. The item "Perrin FMIC Front Mount Intercooler with Red Piping FOR 2002 2007 Subaru WRX STI" is in sale since Wednesday, September 13, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "pulseautosports" and is located in Multiple Warehouses. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Viet nam, China, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Uruguay.