VAG have used a front mount intercooler design as standard, This intercooler is adequate for cooling non modified vehicles, but as our tests have proven, once even a basic remapping of the ECU (stg1 remap) had been carried out, the Intake temperatures had risen to very high levels, which in turn leads to power loss. By fitting a bigger, more efficient AIRTEC intercooler the intake temperatures are kept constantly cooler, keeping your engine safe and your power to the maximum!
The AIRTEC intercooler makes the Charged Air (Intake Temps) cooler so you gain Horse power, its really that simple! TEST RESULTS: Hot side - Into intercooler from turbo & cold side - Out of Intercooler into engine. AIRTEC intercooler + standard remap.Run1 - Hot side 135 degrees C & Cold side 26 degrees C. Run2 - Hot side 128 degrees C & Cold side 23 degrees C. Run3 - Hot side 130 degrees C & Cold side 25 degrees C. AIRTEC intercooler + AmD remap. Run1 - Hot side 162 degrees C & Cold side 28 degrees C.
Run2 - Hot side 156 degrees C & Cold side 26 degrees C. Run3 - Hot side 158 degrees C & Cold side 26 degrees C. The AIRTEC Intercooler really comes into its own when used on more modified vehicles, even bigger BHP gains could be seen on serious spec car which include, full exhaust, turbo upgrades etc these modifications put serious strain on the cooling ability of the stock Intercooler, and you could be losing in excess of 30+bhp! Just by keeping you standard Intercooler fitted. Lower intake temperatures & gain BHP.
60mm bar & plate performance Intercooler core. Larger than standard diameter silicone boost hoses, in a choice of colours. 1x CNC machined boost pipe joiner. Moulded end tanks instead of Restrictive Plastic pressed end tanks these can leak. Full comprehensive step by step fitting instructions.No extra pipe work or additional parts required and, more importantly, no cutting to bumper or fog light removal. Pressure tested to over 5Bar. No additional turbo lag will be experienced, due to our flowing end tank design.
Dynodaze Performance Parts Ltd Specialises in aftermarket parts and remapping. We have an experienced mechanic and fabricator ready to fit any and all parts required. Additional to this we can fit parts to get your vehicle ready for remapping. The item "Airtec Seat leon Mk1 150 Diesel Front Mount Intercooler Upgrade FMIC Kit" is in sale since Friday, September 8, 2017. This item is in the category "Vehicle Parts & Accessories\Car Parts\Turbos & Superchargers\Intercoolers & Parts".The seller is "dynodazeparts" and is located in Nuneaton, Warwickshire. This item can be shipped to United Kingdom, United States, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam, China.