PERRIN Boost Tube Kit & Black Front Mount Intercooler w/Bumper Beam Fits for WRX/STI. A key to making more power on any turbocharged engine is the addition of a high performance air-to-air intercooler. This part in the simplest of terms, cools the air going from the turbo into your engine, much the same as a radiator cools the water inside the engine, by transferring the excess heat way using multiple passages through a core.
A PERRIN intercooler fits easily to the front of your for Subaru to maximize cooling. The most important part of any intercooler system is the core. The core cools the charge air on the way to the engine.
The factory for Subaru tube and fin intercooler was designed to be easy to manufacture, but is not good for performance. Their testing has shown the optimum core design is the 3/8" bar and plate style that has a 3/8" charge air and ambient air path, instead of the common 1/4 size. The PERRIN bar and plate core design is much more durable than tube and fin with the ability to withstand rocks and other debris that may be flying around the road. The PERRIN intercooler core is 28" long x 9.25" tall x 3.5 deep with a volume of 906.5 cu-in. Giving the PERRIN intercooler the best overall design for cooling and pressure drop, and it fills the opening of the for WRX/STI bumper perfectly!
Their intercooler support beam is constructed from boxed steel and powder coated black. Competitors use inexpensive aluminum bumper beams which save a little weight but are easily destroyed in a collision. The PERRIN Performance designed end tanks control for near perfect dispersal of hot air across the intercooler core.By eliminating any 90º corners adding a smooth, and gradual taper from top to bottom turbulence is eliminated. Each end tank incorporates an innovative mounting tab to secure the core to the mounting beam. Every PERRIN intercooler is powder coated to further protect your intercooler from the elements making it look awesome for years to come. Their intercoolers come in two finish options, a bright silver or stealth black powder coat. Core Depth: 3.50 in. Core Height: 9.25 in. Core Type: Bar and Plate. Core Width: 28.00 in. PERRIN boost tubes are CNC mandrel bent from aluminum tubing for better weight reduction. Every boost tube has an over sized beaded end to ensure the hose clamps and couplers stay connected and sealed!
They choose to take the smoothest shortest path to get air to and from the intercooler. Tubes are available in a Black or Red wrinkle powder coat for a long lasting durable finish that looks good in any engine bay. Right off the turbo a smooth offset coupler carries the hot side air charge to a perfectly matched 2.25 boost tube. PERRIN chose 2.25 tubing for a smoother, cleaner, obstruction free routing while still being large enough to flow more WHP than most turbos can put out. The air charge then is routed through the engine bay next to the battery, and down behind the radiator to the intercooler.
The cold side boost tubes are mounted as high as possible in the engine compartment to clear all turbo and intake combinations as it travels to the throttle body through the engine bay. PERRIN Performance silicone couplers are standard with PERRIN intercooler kits. PERRIN couplers are fiberglass fortified with smooth inner walls for long lasting high strength and smooth air flow.Available in glossy black and red. PERRIN Performance T-bolt clamps are standard on PERRIN intercoolers. They are designed for uniform clamping at all points around the band. The wider band distributes the force over a larger area and the fine threaded bolts with nylon lock nuts allow for accurate torque and proper clamping. Never worry about having to re-tighten down the road, plus each PERRIN logo-ed clamp is made in the USA and has the torque spec engraved on each one.
The PERRIN front mount intercooler kit includes a PERRIN Performance coolant overflow tank. It adds clearance for better boost tube routing, holds more coolant than previous designs and uses the OEM tank cap for a great seal! The PERRIN Performance coolant overflow tank is protected from the elements by a black texture powder coating. It looks great and makes the silk screened logo pop. This boost tube kit is only for use with PERRIN front mount intercoolers.CP Cometic ACL Ferrea and ARP Kits. Your address must be confirmed.
Buyers who pay with unconfirmed addresses will not be accepted. We always look to satisfy our customers in whatever needs they may have. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts".
The seller is "boostprojects" and is located in this country: US. This item can be shipped to United States.