- Front Mount Intercooler
- Core Size
- 10.87\ (2)
- 17.5\ (2)
- 18\ (36)
- 19.50\ (3)
- 19.50x6.00x2.50 (2)
- 194w * 530h * 75t Mm (20)
- 19\ (38)
- 20x8x5\ (5)
- 21\ (2)
- 21x7x2.5 (2)
- 24 X 12 X 3 (2)
- 24\ (142)
- 25\ (2)
- 28\ (4)
- 460 X 160 X 90 Mm (4)
- 600 X 300 X 76 Mm (3)
- 600 X280 X 70mm (3)
- 600mm X 300mm X 76mm (3)
- 600x300x76mm (2)
- 700x300x100mm (9)
- ... (3521)
- Features
- Finish
- Aluminum (20)
- Black (8)
- Black / Red (2)
- Brand New (27)
- Brushed Aluminum (21)
- Chrome (3)
- Chrome Plated (2)
- Coated (2)
- Full Aluminum (26)
- Machined Sliver (2)
- Matte (3)
- Matte Textured Paint (4)
- Natural (8)
- Natural Finish (3)
- Painted (2)
- Polished (193)
- Polished / Red (3)
- Polished Aluminum (7)
- Smooth (9)
- Unpainted (2)
- ... (3460)
- Fitment Type
- Overall Size
- Type
- Air / Fuel Line (3)
- Diesel (4)
- Fmic Kit (6)
- Front Mount (6)
- Gpi (2)
- Intercooler (460)
- Intercooler Core (28)
- Intercooler Kit (153)
- Intercoolers (5)
- Mount Intercooler (14)
- Piping (9)
- Radiator (7)
- Tube & Fin (4)
- Turbo Charger (23)
- Turbo Intercooler (985)
- Turbo Kit (3)
- Turbocharger (4)
- Turbocharger Up Pipe (19)
- Upgrade Kit (44)
- Upgraded Intercooler (3)
- ... (2025)
PRL Motorsports FMIC Front Mount Intercooler Upgrade for Honda Accord Turbo 18+
It's no secret that Honda's newer turbo platforms are extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs.
The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 27 x 3.5 x 7.25 550+ horsepower rated bar-and-plate core. Our intercooler core which increases surface area by 85% and internal flow by 83% to allow optimal cooling and airflow. This intercooler utilizes factory mounting spots with cast aluminum end tanks as well as all factory air ducts/shrouds.To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install. (1) Cardboard Stencil w/ "PRL" Logo. (1) 304 Stainless Worm Clamp.
Mid-range & top-end power gains. Major drop in post charge air temperature at peak. Intercooler to Charge Pipe Bolt(s) Torque Spec. When receiving your package, please open all of the boxes immediately to check if all the contents are inside and not damaged.
If the product received is defective, a replacement will be sent as soon as possible. I will refuse any damaged or products that are not in good condition. They will inform you on how to proceed based on their policies.All of my products are 100% brand new unless otherwise stated in the description above. As mentioned above, please inspect your order upon receipt. All items (except those exempted) are intended for off road use only, may never be used on public roads and highways. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "circuitspecr" and is located in this country: US.
This item can be shipped worldwide.- Type: Turbo Intercooler
- Placement on Vehicle: Front
- Other Part Number: PRL-HA10-IC
- Manufacturer Part Number: HA10-IC
- Fitment Type: Direct Replacement
- Brand: PRL Motorsports