Universal Intercooler 3 Inlet/Outlet 31x12x4 Front Mount Large Aluminum

  
NEW Front Shock Absorber Assembly FOR 01-05 Toyota RAV4 FWD 2002 2003 2PC. Easy installation, no special tools required, just remove and replace a complete strut assembly! Each complete strut assembly is designed and tuned for a vehicle-specific application. Designed with premium hollow bumpers to prevent damage to components when the suspension bottoms out, durable Strut Dust Boot protects strut bars and seals from dust and debris. All components are manufactured with high quality, fully loaded complete components are safe and easy to install. All products are carefully built to help maintain good vehicle safety and control. 2x Front Strut w/ Coil Spring Assembly. How to check if the shock absorber is damaged. Oil leakage: Check the shock absorber through the wheel arch with a flashlight.

When oil leakage is found outside the shock absorber, it indicates that the shock absorber has been damaged. Abnormal noise: If the shock absorber makes an abnormal noise when the vehicle is driving on a bumpy road section, it is most likely that the shock absorber has been damaged. Uneven tire wear: When the shock absorber is broken, the wheel will vibrate unevenly during driving.

This will cause the wheels to tilt, which will cause serious wear on the part of the tire that touches the ground, while the untouched tires will not be affected, resulting in uneven wear over time. Press the bumper firmly and then release it. If the car jumps 2 or 3 times, it means that the shock absorber is working well. If you keep nodding your head up and down and bow your waist, it will be broken if it looks very elastic. The hazard of a broken complete strut/shock absorber.

When driving, if the shock absorber assembly of the car wears out, the car may vibrate up and down, bump back and forth, shake left and right, and the front of the car will sway. As a result, the car will deviate to the outside of the curve when the car is making a sharp turn. Trend: When the turning radius of the car is large, the sense of direction is inaccurate, and the car has a tendency to sway; when the car passes on a bad road, the steering wheel can clearly perceive the front suspension vibration significantly increased; when the road is convex, the driver and passengers can feel dull The impact noise; the beating of the wheels when accelerating, resulting in slow acceleration and other problems. 2 Pieces Complete Struts Assembly. The note there will NOT be read. We are committed to resolve all issues in a friendly and satisfactory manner. We will solve your problem during working time (except weekends and public holidays). We are always been trying to provide best service and reliable products for every customer.

If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback. We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you. 4pc Struts Coil Assembly + Shock Fits Chevrolet Cobalt HHR Pontiac G5 Pursuit.

(4) 15mm Hubcentric Wheel Spacers Adapters 5x120 for BMW E36 E46 E60 E61 E62 E90. (4) 2'' 6x5.5'' 14x1.5 Fits Chevy Silverado GMC Sierra 1500 Tahoe Wheel Spacers. 4pcs 2 Thick Wheel Spacers 5x135 Fits Ford F-150 Expedition Lincoln Navigator. Front Complete Struts Shocks For GMC Acadia Buick Enclave Chevy Traverse 172518. 4Pcs 2 Wheel Spacers Adapters 6x5 For Chevrolet Oldsmobile Bravada GMC Envoy.

4Pcs 1.5 5x5 to 5x5 Wheel Spacers Adapters For Chevy Tahoe GMC C1500 Suburban. 4Pcs 4x110 to 4x137 ATV Wheel Spacers Adapters 1 25mm For Honda Suzuki Kawasaki. 2PCS 1.5 6 Lug 6x135 Hubcentric Black Wheel Spacers Adapters For Ford F-150. Core Size: 24"x12"x4. Application:Universal for any Turbo Charger system.

Placement on Vehicle:Front, Left, Rear, Right, Upper. Overall Size: 31"x12"x4. Hot Air Temperature: 32°F302°F (0°C150°C). Material: 100% Aluminum, Bar and Plate Design, Polished.

Construction: Machine Cut and Stamped, Hand Welded. · 100% brand new and high quality, Durable. · It could correctly replace the original quality part. · Bar & Plate Construction.

· Core Size: 24"x12"x4. · Overall Size: 31"x12"x4. · 4" Thickness Core, 3" Inlet & Outlet.

· Compress Air Flow Rate. · Hot Air Temperature: 32°F302°F (0°C150°C).

· Material: 100% Aluminum, Bar and Plate Design, Polished. · Construction: Machine Cut and Stamped, Hand Welded.

Installation Manual Is NOT Included. Professional Installation Is Highly Recommended. Please make sure it will fit your machine before purchasing it.

Please check pictures for more details. Please measure the area where the intercooler is planned to mount on to see if the dimension of this item fits the allotted space. · 1 X 1pcs in set.